Difference between revisions of "DFU"

From krtkl wiki
Jump to navigation Jump to search
(assist with Win10 problems)
Line 8: Line 8:
 
Additionally, we'll provide a few tips here.
 
Additionally, we'll provide a few tips here.
  
 +
 +
==== No LED's in DFU mode ====
 +
 +
The LED pattern seen when booting in to DFU mode varies depending on the version of the firmware booted.  Some of the earliest firmware versions do not light the LED's at all. 
  
 
==== Win10 DfuSeDemo can not find the Snickerdoodle ====
 
==== Win10 DfuSeDemo can not find the Snickerdoodle ====

Revision as of 05:09, 7 February 2021

DFU Device Firmware Upgrade

To upgrade the firmware of the STM32 microcontroller on your Snickerdoodle, please consult

Additionally, we'll provide a few tips here.


No LED's in DFU mode

The LED pattern seen when booting in to DFU mode varies depending on the version of the firmware booted. Some of the earliest firmware versions do not light the LED's at all.

Win10 DfuSeDemo can not find the Snickerdoodle

If you follow the steps in the Firmware User Guide, yet the DfuSeDemo window does not seem to find the Snickerdoodle STM32...

STM32 BOOTLOADER in DeviceManager

First open up Window's Device Manager. You should see the "STMicroelectronics Virtual COM port (COMxxxx)" device active. If you instead see "STM32 BOOTLOADER" or even "STM32 BOOTLOADER" with a caution symbol, you might not have proper device drivers installed on Windows.

Right click on the "STM32 BOOTLOADER" icon and select "Properties". A new Properties window will appear. If the Driver tab indicates that the driver is not found or not correct, this is probably your problem.

Assuming that you have installed DfuSe, you probably have a DfuSe installation directory at a location like "C:\Program Files (x86)\STMicroelectronics\Software\DfuSe v3.0.6" , and it probably contains the device driver you need.


Windows10 Update Drivers Panel

To resolve this problem, you will need to click on the "Update Drivers" button and then "Browse my computer for drivers". When asked where to search, specify the location of the installation (probably "C:\Program Files (x86)\STMicroelectronics\").